Did your PS3 give three beeps when you tried turning it on? Are you looking for the right PS3 3 beeps of death fix that will not only help you fix the problem, but also enable you to prevent a recurrence? Booting your console only to hear the dreaded 3 beeps can be very infuriating, saddening and frustrating. Here are a few things you can do to repair PS3 3 beeps of death.
1. Use the Reflowing Process
What this basically means is that you try to get the broken parts or contacts back together again. You can do this by using a hair dryer aimed at the processor board. Run this over the board for 15-25 minutes. This will help make the solder warm enough to create a form of contact with all wires and cables.
2. Air Dry the Board
Then take it to a fan or an AC and allow this blow on the processor for another 15-225 minutes. This is to allow the slightly melted solder solidify and hopefully re-establish contact with the wires again. After this, couple the console and boot it to see if it will come on. If it still gives the beeping sound, then it is time to use the next PS3 3 beeps of death fix.
3. Get an Instructional Guide
There are guides that will help make the process easier and explain the process in details. Following the step-by-step videos in these guides, you will be able to fix the faults, recover your saved games -you’ll lose them if you send them to Sony and the repair shops- and get the console working within 1-2 hours.