(as of Feb 23,2021 14:13:48 UTC – Details)
Attention please !!!
1. This POE injector should be operated with 12 volt to 48 volt external power supply(Most PoE supported devices need 48V Power suply);
2. This link do not included external power supply
3. If you need 4 ports POE injector with 48v power supply, please check the follow link:
Used for 10/100Mbps Device
4 port PoE Injector module
4 LAN ports, 4 LAN+Power ports, shielded
Power VOIP phones, IP Cameras, WiFi Access Points, and more
Same voltage to all ports, share available power equally
DC plug size : 2.1mm x 5.5mm
Display indicator: LED power light
Compatiable with any ethernet switch or router
Compatiable with 12v to 48v power supplys
Power for 802.3af/at devices (use a 48v power supply)
What in box?
1x 4 port POE power over ethernet injector. [External power supply is not included]
Use with external power supply to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away
Add PoE ability to any Ethernet switch or router. Use this device and External power supply to inject power into the CAT-5, CAT-6 or CAT-7 cable.
10/100M operation. Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground.
Power Supply not included – for 802.3af devices use a 48v supply, Mikrotik uses 24v, Ubiquiti needs 24v or 48v, OpenMesh needs 24v or 48v
Compatible with IP Cameras, IP Phones, WiFi Access Points, and 802.3af